8,8 cm Pak 43 Jagdtiger 10.0 Changes

　　10.0中8.8 cm Pak 43 猎虎的改动

　　HelloWarriors,

　　炮友们大家好

　　as things are very quiet today I took the free time and screenshot the 3D andarmor model of the 8,8 cm Pak 43 Jagdtiger. Oh, and I spoiled you,check out theGifs bellow each 3D image, left them in link form to spare themobile readers bandwidth. ;)

　　在这宁静的一天我花了点的空余时间截了点88虎的装甲模型图.为了讨观众老爷们欢心Rita特地把GIF截图，可以节省手机用户们的流量。当然我会一起发出来的。

　　There is a tiny bit of information thatwas missing:

　　还有就是一些被遗漏的信息

　　- Speed Limit was buffed to 38 / 12 ( 28 / 12 previous).

　　88虎极速被增强到38/12 (现在是28/12)

　　And lets remember what was posted a couple days ago:

　　然后我们回忆一下前几天的消息

　　- Hull MG weakspot disappeared.

　　移除车体机枪口弱点

　　- LFP is now 50° instead of 45°, plusthe very top part of the LFP is 150mm thick.

　　首下从45度改为50度，首下最靠上的部位现在是150mm。

　　- Extra sloped parts on the UFP for the driver and radioman periscopes are lesswide, though the driver one now gives you a tiny sport sloped at 75°.

　　首上顶部潜望镜位置的凹槽变得更小，不过驾驶员潜望镜那一块现在是75度。

　　- Hull floor near the front is 40mm now instead of a solid 25mm.

　　- 车体底部靠前的部分改为40mm，而不再是整一块25mm。

　　- Superstructure rear is 10° instead of5°.

　　- 上部战斗室后部从5度改为10度。

　　- Spare tracks cover a few areas on both sides of the superstructure, they're270mm thick now.

　　- 战斗室两侧各有一小部分区域有备用履带。现在厚达270mm。

　　- Bump on the superstructure front is now pretty much all 150mm thick insteadof half being 80mm.

　　-火炮根部突出的部位现在几乎都是150mm，而原来有一半是80mm。- Superstructure front is now at

　　-15°instead of 11°.

　　-战斗室从前部从11度改为15度

　　- Mantlet is 250mm-210mm thick instead of 240-150mm, meaning you still won't bepenned there.

　　- 炮盾从240-150mm改为250-210mm，也就是说打不穿了。

　　- Superstructure roof is 45mm instead of 40mm now.

　　- 战斗室顶部从40mm改为45mm。

　　3D Model

　　3D模型，今天的本体

　　gif对比版

　　侧面

　　对比版